Pagina 19 - Imperium

Versione HTML di base

The company Oikos S.r.l. guarantees, to the best of its own
technical and scientific knowledge, that the information
contained in this technical data sheet is
correct. Not withstanding that indicated above, Oikos takes
no responsibility for the results obtained through the use
of this product in as much as it is not possible for Oikos to
check or control the application method used. For this reason,
we recommend that you check carefully that each product
chosen, is suitable for each individual use to which it is put.
Technical Qualities
IMPERIUM by Oikos is a metallic, decorative finish for
interiors with a low environmental impact. The product
allows the realisation of splendid decorative effects in a
vast range of shades according to the type of tool used in
application.
The techniques “Gold Leaf”, “Silver Leaf”, “Goldening”
and “Gold Powder” give prestige and a sense of richness
to contemporary settings, bringing to mind the lavishness
of historical villas. IMPERIUM, in its various colours, allows
the decoration of contemporary interiors, creating original
and unique surfaces full of energy, that valorises both the
walls as well as the interior furnishings and fittings.
The product is within the limits of the norm 2004/42/CE
regarding VOC emissions, it is non inflammable and is
friendly to both humans and the environment.
Ideal Use
Decoration of interior walls and furnishings.
Surface Preparation
Clean the surface to be painted, removing any loose or
flaking material. Traces of dirt or grease must be removed
using appropriate products.
As preparation for all the finishes, apply a coat of IL
PRIMER by Oikos, to insure perfect adhesion. Wait 6-8
hours until dry.
Gold/Silver Leaf Effect - Goldening - Metallic
:
screed the surface so that it is perfectly smooth using
STUCCO IN PASTA PER RASATURA by Oikos, in order to
achieve a flat, even and smooth surface. Wait until dry
before applying a coat of NEOFIX by Oikos to even and
reduce the absorption of the surface.
Gold Powder Effect
: apply by brush, as a base, one
coat of white BIAMAX 03 or BIAMAX 07 by Oikos,
crossing over the brush strokes. Wait 4 ÷ 6 hours until dry.
Application Method
Gold/Silver Leaf
: dilute the product with 10% drinkable
water. Apply IMPERIUM on small areas of the wall
(approximately 50x50 cm) using a brush and immediately
dab the area using the indicated Sponge Pad Imperium
(Art 116). Wait 5-6 hours until dry before applying a
second coat of the product in the same way as before.
Goldening
: dilute the product with 10% drinkable water.
Apply IMPERIUM on small areas of the wall (approximately
50x50 cm) using a brush and immediately dab the surface
using the indicated Sponge Glove Imperium (Art 115).
Wait 5-6 hours until dry before applying a second coat of
the product in the same way as before.
Metallic
: to obtain a smooth finish, apply two coats of
IMPERIUM diluted 20% by spray (nozzle 1,3 mm).
First coat: spray the product from left to right and back
again from right to left with the spray guns nozzle set in
the horizontal position. Following this spray from top to
bottom and back again from bottom to top with the nozzle
set in the vertical position and without waiting between the
two coats. The crossing over of the two jets determines the
evenness of the products application.
Second coat: once dry, after 3 ÷ 4 hours, repeat the
application as per the first coat.
Gold Powder
: to obtain the “Gold Powder” effect, on
top of white BIAMAX 03 or BIAMAX 07, apply by brush
a coat of IMPERIUM diluted 15% with drinkable water,
crossing over the brush strokes.
Finish
To achieve a finish with brilliant reflections, it is possible to
mix with the additive DECORGLITTER by Oikos (the best
result are achieved on Metallic and Gold Powder effects).
Technical Characteristics
Application
• Dilution/mix:
Gold/Silver Leaf – Goldening
:
10% with drinkable water
Metallic
: 20% with drinkable water
Gold Powder
: 15% with drinkable water
• Yield:
Gold/Silver Leaf – Goldening
:
6 ÷ 7 m
2
/l in two coats
Metallic
: 6 m
2
/l in two coats
Gold Powder
: on BIAMAX 03: 8 m
2
/l
on BIAMAX 07: 7 m
2
/l
• Application tools: brush, spray (nozzle 1,3), Sponge
Glove Imperium (art. 115), Sponge Pad Imperium
(art.116)
• Fixative: NEOFIX
• Base coat: STUCCO IN PASTA PER RASATURA,
BIAMAX 03 or BIAMAX 07 by Oikos
• Application temperature: +10°C ÷ +36°C
(with relative humidity not exceeding 80%)
• Tack free time: 2 ÷ 4 hours
(temperature = 20°C with relative humidity at75%)
• Drying time – until washable: 7 days
(temperature = 20°C eith relative humidity at 75%)
• Total drying time: 36 hours
(temperature = 20°C with relative humidity at 75%)
• Time until possible to paint over: 6 hours
(temperature = 20°C with relative humidity at 75%)
• Tools cleaning: water
• Warning: the product tends to sediment. Mix and shake
mechanically before use.
The Product
• Composition: special acrylic resins in water dispersion,
organic and inorganic pigments, metallic pigments,
additives to aid application and formation of the surface
film
• Specific weight: 1,1 +/- 3%
• Gloss level: 45 ÷ 70 gloss oat.
(riflexmeter Ericksen 500/60°)
• pH: 8 ÷ 9
• Viscosity: 3.000 ÷ 6.000 CPS +/- 5% Brookfield
(RVT 20 revs/min. a 25°C)
• Storage temperature: +2°C ÷ +36°C.
Keep from freezing
• Reaction to fire: negative if the product is applied on a
non inflammable base; water based material with a dry
thickness of less than 0,600 mm
• Permeability to water vapour: Sd High ; Sd : 0,008 m
(UNI EN ISO 7783-2:2001)
• Resistance to washing:
Class 1; UNI EN ISO 11998:2003
(Class 1: Max – Class 5: min)
• Adhesion to base (grid incision):
Class 0; UNI EN ISO 2409:1996
(Class 0: Max – Class 5: min)
• Emission limits of Volatile Organic Compounds (VOC)
according to directive 2004/42/CE:
Classification: A/b; VOC:50 g/l (max);
Limit Phase I (from 1.1.2007): 150 g/l
Limit Phase II (from 1.1.2010): 100 g/l
• Colours: shades of the colour chart
• Packaging: Liters 1 – 2,5 – 4
Toxicological Data
The product is free of heavy metals such as lead or
chrome. It does not contain toxic solvents, aromatics
or chlorides. There is no risk of any dangerous
polymerisation. The product is considered to be a non-
dangerous substance if used in the technically correct
manner. Normal cautionary measures for the handling of
water based paints are advised. No special arrangements
are required for the storage, movement and transportation
of the product; the containers, residue, eventual spilt
material should be cleaned up using absorbent inert
material such as sand, soil etc. etc. and then disposed of
in accordance with the regional and national regulations
in force at that time. Transportation must be carried out in
accordance with international agreements.
Specifications
Clean the surface to be painted removing any loose or
flaking material. Traces of dirt or grease must be removed
using appropriate products. Clean the surface and apply
IL PRIMER by Oikos as a base coat to insure perfect
adhesion. Wait until the coat of IL PRIMER is dry and then
prepare the base according to the chosen finish.
Following this, apply a metallic product such as IMPERIUM
by Oikos, in one or two coats according to the desired
final effect. Carry out the chosen finish using the tool
recommended to achieve the desired effect. All must be
carried out in accordance with the norms of application
and at a cost of ............. m² including material and
application.
Technical Data Sheet INT/im/01