Page 19 - Pallas

Basic HTML Version

The company Oikos S.r.l. guarantees, to the best of its own
technical and scientific knowledge, that the information
contained in this technical data sheet is
correct. Not withstanding that indicated above, Oikos takes
no responsibility for the results obtained through the use
of this product in as much as it is not possible for Oikos to
check or control the application method used. For this reason,
we recommend that you check carefully that each product
chosen, is suitable for each individual use to which it is put.
Technical Qualities
PALLAS by OIKOS is an even colour, silk finish, decorative
paint that is characterised by the varying reflections that
change depending on the intensity of the light. PALLAS by
OIKOS satisfies the most sophisticated decorative needs,
rekindling the antique splendour of wall tapestries that
once adorned the interiors of the most luxurious villas. The
product is water based and is composed of high-tech resins
that make it washable and give it sanitising properties. It
has a low odour level, is non-inflammable and is friendly to
both humans and the environment.
Ideal Use
Decoration of walls, indoor furniture, any laminate surface,
P.V.C., metal and wood.
Surface Preparation
Clean the surface thoroughly and remove any loose
material; fill in holes or cracks and render the wall
perfectly smooth. Apply two coats of SUPERCOLOR by
OIKOS in the colour indicated in the colour card.
In case of substrates such as: zinc sheets, laminates and
other materials with smooth surfaces, clean and degrease
the surface with appropriate products. Apply a coat of
the special fixative FUNDGRAP by OIKOS; on new wood
apply Novalis Filling Agent by OIKOS.
On these materials it is sufficient to apply one coat of
Application Method
First Coat:
first spray the product on the surface directing
the gun from left to right and viceversa, and then from
top to bottom and viceversa without any interruption
between the direction change. Set the nozzle horizontally
when spraying from left to right and set it vertically when
spraying from top to bottom. The crossing of the spray jets
determines a uniform application of the product.
Second Coat:
once the first coat has dried, 3 ÷ 4 hours
after its application, repeat the same procedure as per
coat one.
To better protect PALLAS from wear and aging, apply on
top of it the special transparent and protective varnish
Technical Characteristics
• Dilution/Mixing: 10 ÷ 20% drinkable water
• Yield: 3 ÷ 4 m
• Application tools: spray gun (nozzle 1,7 mm)
and air compressor (2,5 ÷ 3 atm.)
by OIKOS according to the type of surface
• Base coats: SUPERCOLOR by OIKOS
• Protective coat: WATINS LUX or IGROLUX by OIKOS
• Application temperature: +5°C ÷ +36°C
(with relative humidity not exceeding 80%)
• Drying time until touch dry: 1 ÷2 h
(temperature = 20°C with relative humidity at 75%)
• Drying time until fully cured: 12 ÷ 15 days
(temperature = 20°C with relative humidity at 75%)
• Tools cleaning: water
The product
• Composition: special acrylic resins in water dispersion,
pearlescent pigments
• Specific weight: 1 Kg/l ±3%
• pH: 8.5 ÷ 9
• Viscosity: 7.000 ÷ 10.000 CPS Brookfield
(RVT 20 revs/min. 25°C)
• Storage temperature: +2°C ÷ +36°C.
Keep from freezing
• Fire reaction: negative when applied onto non inflam-
mable surfaces. It is a waterbased product with dry
thickness less than 0.60 mm
• Vapour permeability Sd: 0,9 m
(max allowed limit 2 m, DIN 52 615)
• Resistance to washing: conforms to the norm DIN 53 778
resists to at least 1.000 abrasive revs
• Resistance to abrasion: conforms to the norm DIN 53 778
resists to at least 5.000 abrasive revs
• Cleanness effect: conforms to the norm DIN 53 778 paint
coat free from dirt with less than 800 revs
• Emission limits of Volatile Organic Compounds (VOC)
according to directive 2004/42/CE:
Classification: A/l; VOC: 30 g/l (max);
Phase I limits (dal 1.1.2007): 300 g/l,
Phase II limits (dal 1.1.2010): 200 g/l
• Available colours: colour chart
• Packaging: liters 1 - 5
Toxicological Data
The product is free of heavy metals such as lead or
chrome. It does not contain toxic solvents, aromatics
or chlorides. There is no risk of any dangerous
polymerisation. The product is considered to be a non-
dangerous substance if used in the technically correct
manner. Normal cautionary measures for the handling of
water based paints are advised. No special arrangements
are required for the storage, movement and transportation
of the product; the containers, residue, eventual spilt
material should be cleaned up using absorbent inert
material such as sand, soil etc. etc. and then disposed of
in accordance with the regional and national regulations
in force at that time. Transportation must be carried out in
accordance with international agreements.
Thoroughly clean the surface, removing any loose material.
Render the surface smooth by screeding. If necessary
use the indicated primer by Oikos in the case there are
problems of adhesion. Proceed with the application of
two coats of the base coat SUPERCOLOR by OIKOS
coloured to the same tone as the finish then proceed with
the application of a decorative product such as PALLAS
by OIKOS. All must be carried out in accordance with the
norms of application, at a cost of ........./m
inclusive of
materials and labour.
Technical Data Sheet INT/pl/02