Page 35 - Ottocento

Basic HTML Version

The company Oikos S.r.l. guarantees, to the best of its own
technical and scientific knowledge, that the information
contained in this technical data sheet is
correct. Not withstanding that indicated above, Oikos takes
no responsibility for the results obtained through the use
of this product in as much as it is not possible for Oikos to
check or control the application method used. For this reason,
we recommend that you check carefully that each product
chosen, is suitable for each individual use to which it is put.
Technical characteristics
OTTOCENTO ANTICO VELLUTO is a vapour permeable
coating, that due to its formulation based on resins in
water dispersion and special metallic pigments, makes
it possible to obtain unique decorative finishes in either
a classic style or a more modern design. The principle
characteristic of OTTOCENTO ANTICO VELLUTO is that
of reproducing, according to the reflection of light, an
effect similar to that of velvet. It has a low odour level, is
non inflammable and is friendly to both humans and the
environmentally.
Ideal use
Decoration of walls and interior surfaces.
Surface preparation
Clean the surface to be decorated, removing any loose
material. For old or powdering surfaces it is advisable to
apply a coat of either NEOFIX or CRILUX by OIKOS. For
rough or uneven surfaces, screed over first with STUCCO
IN PASTA PER RASATURA by OIKOS.
Application method
Prepare the base by applying by roller one or two coats
of SUPERCOLOR by OIKOS in the colour indicated on the
colour chart diluted 40% with drinkable water. Once dry
after 4 ÷ 6 hours proceed to apply OTTOCENTO ANTICO
VELLUTO according to the type of finish desired.
ANTICO VELLUTO effect:
apply OTTOCENTO
ANTICO VELLUTO on the surface in an irregular fashion
using a medium size Inox steel trowel until the whole
surface has been covered. Before the product dries,
pass over the surface moving the product about with
the trowel in order to obtain the desired two–tone velvet
effect. The application and working of the product do
not create problems of joins in as much as OTTOCENTO
ANTICO VELLUTO, smoothed over and squashed by the
trowel during application, compacts itself and flattens in
a n even fashion between one area and another.
IMPERIALE/DAMASCO effect:
apply using a
short hair roller, two coats of OTTOCENTO ANTICO
VELLUTO diluted 50% with drinkable water, leaving 6 ÷
8 hours between coats; Once dry, create the decorative
IMPERIALE effect finish by dabbing the surface with a
tampon or for the decorative DAMASCO effect, using
a marine sponge, in both cases using the same color of
SUPERCOLOR by OIKOS as was used for the base coat,
diluted 70 ÷ 80% with drinkable water.
LE TAPPEZZERIE effect:
apply with short hair roller
two coats of OTTOCENTO ANTICO VELLUTO diluted
50% with drinking water leaving 6 ÷ 8 hours between
one coat and the other; once dry create the desired
decorative finish by applying, with the indicated tool, the
same colour of SUPERCOLOR by OIKOS that was used
as the base coat, diluted 70 ÷ 80% with drinkable water.
Finish
To protect and make OTTOCENTO ANTICO VELLUTO fully
washable, apply the special transparent protective varnish
WATINS LUX or IGROLUX by OIKOS.
Technical characteristics
Application
• Dilution/Mixing: ready to use or 50% drinkable water
depending on the desired effect
• Yield: 7 ÷ 8 m
2
/l depending on the desired effect
• Application tools: medium size Inox steel trowel, roller,
pad, marine sponge by OIKOS
• Primer: NEOFIX o CRILUX by OIKOS
• Basecoat: SUPERCOLOR by OIKOS as indicated in the
color chart
• Protective coat: WATINS LUX o IGROLUX by OIKOS
• Application temperature: +5°C ÷ +36°C
(with relative humidity not exceeding 80%)
• Drying time touch dry: 1 ÷ 1,5 hours
(temperature = 20°C with relative humidity at 75%)
Drying time fully cured: 7 days
(temperature = 20°C with relative humidity at 75%)
• Tools cleaning: water
The Product
• Composition: resins in water dispersion, organic and
inorganic pigments and special metallic pigments.
• Specific weight: 1,08 kg/l ±3%
• pH: 6,5 ÷ 7,5
• Viscosity: 14.000 ÷ 18.000 CPS Brookfield
(RVT 20 revs/min. a 25°C)
• Storage temperature: +2°C ÷ +36°C.
Keep from freezing
• Fire reaction: negative when applied on a non
inflammable surface; water based material with dry
thickness of less than 0,600 mm
• Vapour permeability Sd: 0,24 m
(max allowed limit 2 m, DIN 52 615)
• Emission limits of Volatile Organic Compounds (VOC)
according to directive 2004/42/CE:
Classification: A/l; VOC: 30g/l (max);
Limit Phase I (from 01/01/2007): 300g/lt
Limit Phase II (from 01/01/ 2010): 200g/lt
• Available colours: shades of the color chart
• Packaging: l 1 – 5
Toxicological data
The product is free of heavy metals such as lead or
chrome. It does not contain toxic solvents, aromatics
or chlorides. There is no risk of any dangerous
polymerisation. The product is considered to be a non
dangerous substance if used in the technically correct
manner. Normal cautionary measures for the handling of
water based paints are advised. No special arrangements
are required for the storage, movement and transportation
of the product; the containers, residue, eventual spilt
material should be cleaned up using absorbent inert
material such as sand, soil etc. etc. and then disposed of
in accordance with the regional and national regulations
in force at that time. Transportation must be carried out in
accordance with international agreements.
Specifications
Carefully clean the surface removing any loose material.
Apply, if necessary an acrylic primer such as CRILUX
or NEOFIX by OIKOS and wait for it to dry. Once dry
after 4 ÷ 6 hours proceed to apply on to a smooth and
fully prepared surface, OTTOCENTO ANTICO VELLUTO
according to the type of finish desired.
ANTIQUE effect:
apply OTTOCENTO ANTICO
VELLUTO in an irregular fashion using a medium size
Stainless steel trowel until the whole surface has been
covered. Before the product dries, pass over the surface
moving the product with a clean trowel in order to obtain
the desired two – tone velvet effect. The application and
working of the product do not create problems of joins in
as much as OTTOCENTO ANTICO VELLUTO, smoothed
over and squashed by the trowel during application,
compacts itself and flattens in an even fashion between
one area and another.
IMPERIALE/DAMASCO effect:
apply two coats of
OTTOCENTO ANTICO VELLUTO diluted with 50%
drinkable water, using a short hair roller, leaving 6 ÷ 8
hours between coats; once dry, create the decorative
IMPERIALE effect by dabbing the surface with a
TAMPON or for the decorative DAMASCO effect, using
a MARINE SPONGE, in both cases using the same color
of SUPERCOLOR by OIKOS as was used for the base
coat, diluted with 70 ÷ 80% drinkable water.
LE TAPPEZZERIE effect:
apply with short hair roller
two coats of OTTOCENTO ANTICO VELLUTO diluted
50% with drinking water leaving 6 ÷ 8 hours between
one coat and the other: Once dry, create the desired
decorative finish by applying, with the indicated tool, the
same colour of SUPERCOLOR by OIKOS that was used
as the base coat, diluted 70 ÷ 80% with drinkable water.
All must be carried out in accordance with the norms of
application, at a cost of …………/m
2
inclusive of
materials and labour.
Technical Data Sheet INT/ot/04