Page 21 - Biamax

Basic HTML Version

The company Oikos S.r.l. guarantees, to the best of its own
technical and scientific knowledge, that the information
contained in this technical data sheet is
correct. Not withstanding that indicated above, Oikos takes
no responsibility for the results obtained through the use
of this product in as much as it is not possible for Oikos to
check or control the application method used. For this rea
we recommend that you check carefully that each product
chosen, is suitable for each individual use to which it is p
Technical Characteristics
BIAMAX by Oikos is a decorative paint for interiors
with fillers of a selected grain size. The product is
based on acrylic resins in water dispersion and has a
Low Environmental Impact. It is vapour permeable and
extremely resistant to abrasion and is available in the
versions 03 (grain size max 0,3 mm) and 07 (grain size
max 0,7 mm).
BIAMAX, thanks to its notable coverage, can be used
directly as a coloured finish to create an irregular, antique
wall decoration but can also be used as a preparatory
product on which to create splendid decorative effects.
BIAMAX 07, thanks to its lager grain size, can also be
used as a white or coloured finish plaster.
BIAMAX has excellent coverage, has good filling qualities,
is non in-flammable and is friendly to both humans and the
environment.
Ideal Use
Decoration for interior walls.
Surface Preparation
Clean the surface to be decorated removing any loose
or flaking material. On old and crumbling surfaces, it is
recommended to apply a coat of NEOFIX by Oikos. On
surface that are in good condition, proceed to apply a
coat of the primer IL PRIMER by Oikos. Wait at least 8
hours before applying finishing products.
Application Method
Antique effect:
using a brush, apply a coat of BIAMAX,
diluted 10% - 15% with drinkable water, crossing over the
brush strokes.
Plaster type finish:
using an inox steel trowel, apply 2
even coats of BIAMAX 07, leaving 7 ÷ 8 hours between
coats. Before the second coat dries, proceed to smooth
over the surface using the plastic trowel in circular
movements.
Finish
To achieve a finish with sparkling reflections, it is possible
to mix the additive DECORGLITTER by Oikos.
Technical Characteristics:
Application
• Dilution:
• Plaster type finish: BIAMAX 07 ready to use
• Antique effect: 10 ÷ 15% with drinkable water
• Yield:
• Plaster type finish:1,2 m
2
/l in two coats of BIAMAX 07
• Antique effect: 3,5 ÷ 4 m
2
/l in one coat BIAMAX 07
4 ÷ 4,5 m
2
/l in one coat BIAMAX 03
• Application tools: brush, inox trowel, plastic trowel
• Primers: NEOFIX, IL PRIMER
• Application temperature: +5°C ÷ +36°C
(with relative humidity not exceeding 80%)
• Drying time until touch dry: 2 ÷ 3 h
(temperature = 20°C with relative humidity at 75%)
• Total drying time: 12 ÷ 14 h
(temperature = 20°C with relative humidity at 75%)
• Time until possible to paint over: 6 ÷ 8 h
(temperature = 20°C with relative humidity at 75%)
• Tools cleaning: water
The product
• Composition: acrylic resins in water dispersion, fillers
of selected grain sizes, titanium dioxide, organic and
inorganic pigments, active additives to aid application
and formation of the surface film
• Specific weight: 1,6 Kg/l ±3% (White)
• Grain size:
• BIAMAX 03: max 0,3 mm
• BIAMAX 07: max 0,7 mm
• pH: 8,5 ÷ 9,5
• Viscosity:
• BIAMAX 03: 30.000 CPS ± 5% Brookfield
(RVT 20 revs/min. 25°C)
• BIAMAX 07: 37.500 CPS ± 5% Brookfield
(RVT 20 revs/min. 25°C)
• Storage temperature: +2°C ÷ +36°C.
Keep from freezing
• Permeability to water vapour Sd:
• BIAMAX 03: high;
Sd: 0,009m (UNI EN ISO 7783-2:2001)
• BIAMAX 07: high;
Sd: 0,007m (UNI EN ISO 7783-2:2001)
• Resistance to detachment:
• BIAMAX 03: 2 MPa, break A/B
(UNI EN ISO 4624:2006)
• BIAMAX 07: 2 MPa, break A/B
(UNI EN ISO 4624:2006)
• Emission limits of Volatile Organic Compounds (VOC)
according to directive 2004/42/CE:
• BIAMAX 03:
Classification: A/a; VOC: 16 g/l (max);
Phase I limits (dal 1.1.2007): 75 g/l,
Phase II limits (dal 1.1.2010): 30 g/l
• BIAMAX 07:
Classification: A/a; VOC: 26 g/l (max);
Phase I limits (dal 1.1.2007): 75 g/l,
Phase II limits (dal 1.1.2010): 30 g/l
• Colors: white + shades of the Biamax and Interior colour
chart on the tinting system DCS Decor Color System by
OIKOS
• Packaging: liters 1 - 4 - 10 - 14
Toxicological Data
The product is free of heavy metals such as lead or
chrome. It does not contain toxic solvents, aromatics
or chlorides. There is no risk of any dangerous
polymerisation. The product is considered to be a non-
dangerous substance if used in the technically correct
manner. Normal cautionary measures for the handling
water based paints are advised. No special arrangem
are required for the storage, movement and transportat
of the product; the containers, residue, eventual spilt
material should be cleaned up using absorbent inert
material such as sand, soil etc. etc. and then disposed
in accordance with the regional and national regulatio
in force at that time. Transportation must be carried out
accordance with international agreements.
Specification
Clean the surface to be decorated removing any loose
or flaking material. On old and crumbling surfaces, it i
recommended to apply a coat of NEOFIX by Oikos. O
surface that are in good condition, proceed to apply a
coat of the primer IL PRIMER by Oikos.
• Antique effect: apply, using a brush, a coat of BIAM
diluted 10% - 15% with drinkable water, crossing ov
the brush strokes.
• Plaster type finish: apply, using an inox steel trowel, t
even coats of BIAMAX 07, leaving 7 ÷ 8 hours betw
coats. Before the second coat is fully dry, proceed to
smooth over the surface in circular movements using
plastic trowel.
All must be carried out in accordance with the norms o
application, at a cost of ………… m
2
inclusive of mater
and labour.
Technical Data Sheet INT/bx/03